The
following are the key points to the VGP optimization:
·
All
major adjustments are set to SMPTE 274/Rec 709.
·
D-ILA
bias points set to improve black level.
·
Color
temperature set to D65 at all levels including black (0
video).
·
Maximum
contrast set in all three colors while maintaining D65
color temperature.
·
Maximum
light output set while maintaining D65 color temperature.
·
Gamma
Profile (g
=
2.2) is set to SMPTE 274 specifications.
The
following adjustments will be made on an as needed basis:
·
Balance
8-bar gain and offset to minimize “vertical stripe” effect.
·
Shading
is adjusted but not guaranteed (due to limited adjustments available).
Notes:
1.
Setting
up to D65 may
reduce your total light output from graphics mode. D65 requires
a
specific mix of red, green, and blue
light that is different from the color temperature used in
the graphic mode.
2.
This procedure is available for the following transportable
models only. Please call for the GL150cl and SX-21 models.
DLA-G10, DLA-S10,
DLA-G11, DLA-G15, DLA-M15,
DLA-C15,
DLA-G20, DLA-M20
3.
The procedure is warranted for 30 days.
Call
us to request the
VGP
optimization procedure:
VGP
Procedure Cost: $600
|
Please
have the following information available:
·
Projector
Model
·
Serial
Number
·
The
Projector mounting orientation
(right-side up or up-side down).
·
Your name,
address, and phone number
|